Specifying references for output data, continued – Schneider Electric Processor Adapter User Manual
Page 385
Configuring a Modbus Plus Network in Concept with Peer Cop
870 USE 101 10 V.2
385
Specifying References for Output Data, Continued
Procedure,
Continued
Continued on next page
Step
Action
2
Since you are addressing the device at address 3, you will use the line for
Source 3. Type the value 400016
on that line in the Dest. Ref. column.
3
Type the value 1 in the Length column, indicating that the device at address 3
will supply one word of data. In this case, we will leave the default BIN setting.