Schneider Electric Processor Adapter - Manual (Page 153)

Using the Ethernet Port
870 USE 101 10 V..2 153
Reading Ethernet Network Statistics
Overview Ethernet Network statistics are stored in the processor adapter and can be viewed
by the user.
Procedure The M1 ethernet Processor Adapter’s Ethernet Network Statistics can be viewed
using the Network Options Ethernet Tester. This software utility is available with the
Quantum 140 NOE 771 00 10/100 Megabit Ethernet Module User Guide 840 USE
116 00.
Table of
Statistics Network statistics occupy word 4 through word 35 in the Modbus Status Table, as
follows:
Table 1: TCP/IP Ethernet Statistics Table
Word Data
00 ... 02 MAC Address
03 Board Status
04, 05 Rx Interrupt
06, 07 Tx Interrupt
08, 09 NA
10, 11 Total Collisions
12, 13 Rx Missed Packet Errors
14, 15 NA
16, 17 Chip Restart Count
Lo word – Collison Peak Detector
18, 19 Framing Errors (Giant Frame Error)
20, 21 Overflow Errors
22, 23 CRC Errors
24, 25 Receive Buffer Errors (Out of Server Paths)
26, 27 Transmit Buffer Errors
28, 29 Silo Underflow (TCP retries)
30, 31 Late Collision
32, 33 Lost Carrier
34, 35 16 Collision Tx Failure
36, 37 IP Address