Schneider Electric Processor Adapter - Manual (Page 269)

Using Peer Cop with Modsoft
870 USE 101 10 V.2 269
Confirming the Peer Cop Summary Information, Continued
Procedure Follow the steps in the table below to change the Peer Cop summary information.
Continued on next page
Step Action
1 Push to move the cursor to the menu bar at the top of the Peer Cop screen.
2 Move the cursor onto the Timeout command. Push .
Result: The cursor moves into the Timeout field in the Peer Cop summary
information region, and the default value, 500, is cleared.
3 Type the number 240, then push .