5 ether duplex, Ether duplex – FUJITSU XG Series P3NK-4452-01ENZD User Manual
Page 94
XG Series User's Guide
Chapter 5 Command Reference
Port Information Settings
94
5.1.1.5
ether duplex
Function
Set the full-duplex or half-duplex link mode.
Available Model
XG0224 / XG0448
Syntax
ether
Options
• ether port number
Set a port number to use with a decimal value. When setting multiple port numbers,
separate them with commas (,). When setting sequential numbers, separate them with
hyphens (-). (Example: "11-16")
Full-duplex or half-duplex link mode.
• full
Operates in full-duplex fixed link mode.
• half
Operates in half-duplex fixed link mode.
This option can be specified only when a fixed link speed has been specified by the
command. (This option setting is made invalid if the link speed has been
set to "auto".)
Use Mode
Configuration mode (admin class)
Explanation
Set the full-duplex or half-duplex link mode on the Ethernet port.
Caution
• If "1000" is specified in the
command, this command setting is disabled
and the system operates in full-duplex link mode.
• If "auto" is specified in the
command, this command setting is disabled
and the system operates depending on the result autonegotiated with the connected
device.
Default
It is assumed that full-duplex link mode has been specified.
Range
Model
1 to 24
XG0224
1 to 48
XG0448
ether