FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 305)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 305
5.15.8.10 serverinfo ftp filter
Function Set the application filter for the FTP server function.
Available Model XG0224 / XG0448 / XG2600
Syntax serverinfo ftp filter acl
Options
• Filtering definition number
Specify a definition number, which indicates a filtering priority, with a decimal value
from 0 to 29.
A smaller value has a higher priority.
Specify an operation when filtering conditions are satisfied.
• accept
Transmit the relevant packet.
• reject
Block the relevant packet.
• ACL definition number
Set the required ACL definition number with a decimal value.
If the ACL specified in is not set, the filtering definition will be disabled and
ignored.
The following ACL definition is available for application filtering.
• ip
Set only the source IP address and the number of mask bits.
If the ip value is not set, the filtering definition will be disabled and ignored.
Use Mode Configuration mode (admin class)
Explanation Set the application filter for the FTP server function.
Default It is assumed that the application filter is not set for the FTP server function.