31 backup standby – FUJITSU XG Series P3NK-4452-01ENZD User Manual
Page 121
XG Series User's Guide
Chapter 5 Command Reference
Port Information Settings
121
5.1.1.31 backup standby
Function
Set the standby status of backup ports.
Available Model
XG0224 / XG0448 / XG2600
Syntax
backup
Options
• Backup group number
Set a backup group number with a decimal number.
Set the standby status of backup ports.
• online
The backup port in standby status does not go offline.
• offline
The backup port in standby status goes offline.
Use Mode
Configuration mode (admin class)
Explanation
Set the standby status of backup ports.
If the standby state is specified to offline, the backup port in standby status goes offline.
The offline port is in the same state as when the
control is executed.
If the currently operating backup port goes down, the offline port is released.
The released port is switched unless it is still offline due to another function or has an
error.
Caution
• When the backup port selection method is set as a "master", backup priority port is not
offline even it is set to be offline in standby status.
If the backup priority port must be offline, set the backup port selection method as
"earlier".
• When backup port is set to be offline in standby status, offline port cannot be released
automatically by any function other than backup port function. The same is true for the
offline port set by
command.
Default
It is assumed that "online" has been specified as the standby status of backup ports.
Range
Model
1 to 13
XG0224
1 to 26
XG0448
1 to 13
XG2600
backup