FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 510)

XG Series User's Guide Chapter 5 Command Reference
NETTIME (time/sntp) Server and Client Statistics Display and Clear
Operation Commands
510
5.36.1.2 show nettime statistics
Function Display the statistics with the NETTIME (time/sntp) function.
Available Model XG0224 / XG0448 / XG2600
Syntax show nettime statistics [ []]
Options
N/A
Display all the currently operating device information.
Specify the display mode.
• server
Display the information of the server function (the clock data provider).
• client
Display the information of the client function (the clock data receiver).
Specify the protocol to display.
• time
Display the TIME protocol information.
• sntp
Display the simple NTP protocol information.
Use Mode Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation Display the NETTIME (time/sntp) statistics.
Caution The time acquisition from this product by "rdate" command is not included in the
NETTIME (time/sntp) statistics.
Execution Example
The following gives an example of a command execution with each option.
Only the active protocol in the specified mode is displayed.
# show nettime statistics client time
NETTIME client statistics information:
[time tcp]
0 request transmission error
0 transmitted synchronized request
0 received response
0 received invalid packet
0 received clock not synchronized
0 local clock updated
#