FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 281)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 281
5.15.2.2 syslog server pri
Function Set the severity level for syslog information sent to the syslog servers.
Available Model XG0224 / XG0448 / XG2600
Syntax syslog server pri
Options
• Definition number
Specify the definition number of the server that receives system log information
(message) with a decimal value from 0 to 2.
• Priority
Specify the severity level for syslog output. When specifying multiple parameters,
separate them with commas (,).
- error
Specifies a severity level of LOG_ERROR events will be output to the syslog servers.
- warn
Specifies a severity level of LOG_WARNING will be output to the syslog servers.
- notice
Specifies a severity level of LOG_NOTICE will be output to the syslog servers.
- info
Specifies a severity of LOG_INFO will be output to the syslog servers.
Use Mode Configuration mode (admin class)
Explanation Specify severity levels to output to each syslog server from among those specified by
"syslog server address" command.
Default It is assumed that "error", "warn" and "info" are specified.