beautypg.com

FUJITSU XG Series P3NK-4452-01ENZD User Manual

Page 475

background image

XG Series User's Guide

Chapter 5 Command Reference

Bridge Counter, Log, Statistics, and Status Display and Clear Operation

Commands

475

20)

Number of TCN BPDU send times

The number of TCN BPDU send times is displayed.

21)

Number of TCN BPDU send error times

The number of TCN BPDU send error times is displayed.

22)

Number of TCN BPDU receive times

The number of TCN BPDU receive times is displayed.

23)

Number of TCN BPDU receive discarding times

The number of TCN BPDU receive discarding times is displayed.

24)

Number of protocol version error times

The number of discarding times due to protocol version error is displayed.

25)

Number of version error times

The number of discarding times due to version error is displayed.

26)

Number of BPDU type error times

The number of discarding times due to BPDU type error is displayed.

27)

Number of topology change detection times

The number of topology change detection times is displayed.

28)

Topology change detection time

The clock time when the topology change was lastly detected.

29)

Elapsed time after topology change detection

The elapsed time after the topology change was lastly detected.

30)

STP (IEEE802.1D) compatibility mode

One of the following is displayed for the STP (IEEE802.1D) compatible mode
operation of the port.
STP

: The port is active in the STP compatible mode when the port version is

RSTP or MSTP.

-

: The port is not active in the compatible mode (but operating in the port's

operation version).

31)

Boundary port status

The boundary port status of the region is displayed as follows.
However, if the port role at the opposite device is an alternate or backup, that
port may never receive the "BPDU". In such cases, the boundary port status is
not displayed.
*

: Indicates that the port is active as the boundary port.

-

: Indicates that the port is NOT active as the boundary port.

32)

Number of forwarding status transition times

The number of times when the port was changed to the forwarding state is
displayed.