FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 208)

XG Series User's Guide Chapter 5 Command Reference
LAN Information Settings 208
5.5.4 LLMNR Related Information
This section explains about the commands related to LLMNR Related Information.
5.5.4.1 lan llmnr use
Function Set to use the LLMNR function.
Available Model XG0224 / XG0448 / XG2600
Syntax lan [] llmnr use
Options
• lan definition number
Specify a lan definition serial number with a decimal value.
The default is 0.
• on
Enable LLMNR function.
• off
Disable LLMNR function.
Use Mode Configuration mode (admin class)
Explanation Set whether or not to enable the LLMNR function on this interface.
If enabled, this device answers LLMNR Query for hostname of this device.
Sender The LLMNR function to
The hostname of this device is set by
"sysname" command, and the default hostname is
Model name (e.c. XG0224).
Caution
• "lan llmnr use" (lan llmnr use on) and "oob llmnr use" (oob llmnr use on) definitions can
be set only 2 definitions for the entire device.
• Up to 2 commands can be set for the entire device, including the "lan llmnr use" (lan
llmnr use on) and "oob llmnr use" (oob llmnr use on) commands.
• If none of "lan ip address" and "lan ip6 use on" definition exist on the lan interface
LLMNR function dosn't work.
Default It is assumed that the LLMNR function is not used on the lan interface.