FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 370)

XG Series User's Guide Chapter 5 Command Reference
Configuration Display, Delete and Operation Commands 370
5.19.1.2 show running-config
Function Display the configuration during operation.
Available Model XG0224 / XG0448 / XG2600
Syntax show running-config [all] []
Options
all
Display all configuration including default values.
If omitted, only the modified configuration is displayed.
Display the configuration beginning with .
The section is NOT included in the configuration to be displayed.
If omitted, all configurations are displayed.
Use Mode Operation mode (admin class)
Configuration mode (admin class)
Explanation Display the currently running configuration.
Execution Example
5.19.1.3 show startup-config
Function Display the configuration to be used for device startup.
Available Model XG0224 / XG0448 / XG2600
Syntax show startup-config []
Options
Display the configuration beginning with .
The character string, containing all options, characters and digits, without changing,
displayed by the
"show running-config" or "show candidate-config" command must be
specified in the option.
The section is not included in the configuration to be displayed.
If omitted, all configurations are displayed.
Use Mode Operation mode (admin class)
Configuration mode (admin class)
Explanation Display the configuration that was used at startup or the saved startup configuration.
Execution Example
# show running-config lan 1
ip address 192.168.1.1/24 3
ip rip use v1 v1 0 off
# show startup-config
lan 0 ip address 192.168.0.1/24 3
lan 0 vlan 1
syslog pri error,warn,info
syslog facility 23
telnetinfo autologout 5m
time zone 0900