FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 535)

XG Series User's Guide Chapter 5 Command Reference
USB Port Control Commands 535
5.45 USB Port Control Commands
This section explains about commands related to USB Port Control Commands.
5.45.1 USB Port Control Commands
5.45.1.1 usbctl
Function Disables or enables USB ports.
Available Model XG0224 / XG0448 / XG2600
Syntax usbctl
Options
• enable
Enable USB port.
• disable
Disable USB port.
Use Mode Operation mode (admin class)
Configuration mode (admin class)
Explanation Enables/disables USB ports.
When enabled, if overcurrent status is detected, recommences supply of electricity and
clears overcurrent detection status.
When disabled, connected USB memory will appear to be disconnected in order to cease
supply of electricity.
Execution Example
# usbctl enable
#