FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 125)

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings 125
5.1.3.2 ether stp domain cost
Function Set the path cost.
Available Model XG0224 / XG0448 / XG2600
Syntax ether stp domain cost {auto|}
Options
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
• STP instance ID number
Specify a decimal value from 0 to 15.
For non-MSTP operation mode, entering a value from 1 to 15 makes it invalid, although
the allowable range is set with a value from 0 to 15.
auto
Determine the cost automatically.
• Path cost
Set the path cost with a decimal value from 1 to 200000000.
Use Mode Configuration mode (admin class)
Explanation Set a path cost of the STP port.
Caution The cost specified by the instance ID 1 to 15 is valid only when the device is in the MSTP
operation mode (stp mode mstp), but the set value is ignored when the device is in the
non-MSTP operation mode.
Default It is assumed that automatic setting is used for the ether port path cost.
ether stp domain 0 cost auto