FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 122)

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings 122
5.1.2 MAC Information
This section explains about the commands related to MAC information.
5.1.2.1 ether mac storm
Function Set the broadcast and multicast storm control information.
Available Model XG0224 / XG0448 / XG2600
Syntax
XG2600
ether mac storm
XG0224/XG0448
ether mac storm
Options
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
• Threshold of broadcast traffic
Set the threshold value for broadcast storm traffic with Kbit/s, Mbit/s or Gbit/s
8k - 8000000k
1m - 8000m
1g - 8g
(Storm monitoring does not start if the threshold is set to 0.)
• Threshold of multicast traffic
Set the threshold value for multicast storm traffic with Kbit/s, Mbit/s or Gbit/s
8k - 8000000k
1m - 8000m
1g - 8g
(Storm monitoring does not start if the threshold is set to 0.)
Set the action which occurs if the traffic exceeds the threshold.
• discard
Discard the packets which exceed the threshold
• close
Close the port (offline)
• Threshold
Set the traffic threshold value for the broadcast or multicast storm.
Set the number of packets per second in the following range.
(Storm monitoring does not start if the threshold is set to 0.)
Range Model
0 to 30,000,000 XG0224 / XG0448