FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 563)

XG Series User's Guide Chapter 6 Managing the Device
Saving/Restoring Configuration Information 563
Restoring configuration information using the FTP server function
The following explains how to restore configuration information using ftp commands on a PC.
Precautions
Be sure to observe the following precautions while performing maintenance operations:
• Do not cut power to the device.
• Ensure that no data communication is taking place on the device.
• Perform only when no configuration is taking place on the console.
z Example of using an ftp command
The following example restores configuration information 1 from the config1-1 file on the PC.
Reference "5.14 Password Information" (pg.257)
C:\>cd Directory in which to store configuration information
C:\tmp>ftp 192.168.1.1
: Connect to the device.
Connected to 192.168.1.1.
220 XG2600 V01.00 FTP server (config1) ready.
Name(192.168.1.1:root): ftp-admin
: Enter the user name.
331 Password required for ftp-admin.
Password:
: Enter the password.
230 User ftp-admin logged in.
ftp>bin
: Enter binary mode.
200 Type set to I.
ftp>put config1-1 config1
: Write the config1-1 file as configuration information 1.
local: config1-1 remote: config1
200 PORT command successful.
150 Opening BINARY mode data connection for ‘config1’
226- Transfer complete.
update : File information check now!
update : File information check ok.
•
•
226 Write complete.
2856 bytes sent in 1.10 seconds (2.44 Kbytes/s)
ftp>get reset
: Restart the device.
local: reset remote: reset
200 PORT command successful.
421 Reset request ok. bye.
ftp>bye
: Finish
C:\tmp>
FTP client
IP address
192.168.1.1
Put configuration information
with an ftp command