FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 131)

XG Series User's Guide Chapter 5 Command Reference
Port Information Settings 131
5.1.4.3 ether lldp vlan
Function Set VLAN for sending LLDP information
Available Model XG0224 / XG0448 / XG2600
Syntax ether ldp vlan
Options
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
vlan
Set VLAN ID for port-and-protocol-vlan-id, vlan-name,protocol-identity transmission.
Use Mode Configuration mode (admin class)
Explanation Set VLAN ID for ort-and-protocol-vlan-id, vlan-name, protocol-identitytransmission.
Default All VLAN information is sent.
5.1.4.4 ether lldp notification
Function Set SNMP Notification Trap transmission information
Available Model XG0224 / XG0448 / XG2600
Syntax ether lldp notification
Options
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
• SNMP Notification Trap Transmission Mode
Set whether SNMP Notification Trap is sent or not when LLDP information of the
specified physical port is changed.
enable: Send SNMP Notification Trap
disable: Not send SNMP Notification Trap
Use Mode Configuration mode (admin class)
Explanation Set whether SNMP Notification Trap is sent or not when LLDP information of the
specified physical port is changed.
Caution When snmp service command is disabled or snmp traplldpremtableschange coomad is
disabled, SNMP Notification Trap (lldpRemTablesChange Trap) is not sent.
Default lldp notification disable.
ether lldp notification disable