FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 546)

XG Series User's Guide Chapter 5 Command Reference
Effect by "commit" Command Execution 546
(5)
The port which is set to be target port, is used for monitoring function only, and
can not be used for forwarding.
(6)
Forwarding frames is interrupted briefly.
*1
The registered learning table may be deleted.
*2
If changed the VLAN ID which used by system for the Management Port, the
communication via the Management Port is interrupted briefly, and the TCP
session is closed.
*3
If the bridge network configuration is changed, the registered learning table may
be deleted or the communication via the relevant interface may be interrupted
briefly.
*4
If configured to use ACL Filter/QoS, the forwarding frames is interrupted briefly.
*5
If there are "vlan protocol" definitions over 16, the definition, the VLAN and the
ports belong to the VLAN are invalid.
*6
The system reconfigure the Protocol VLAN and the ACL Filter/QoS, the
communication via the all ports is interrupted briefly.