FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 180)

XG Series User's Guide Chapter 5 Command Reference
VLAN Information Settings 180
Note 4.
Up to 700 commands can be set for the entire device, including the definitions which refer
to ACL such as
"ether macfilter" , "ether qos aclmap" , "vlan macfilter" , "vlan ip6filter" ,
"vlan qos aclmap" , "vlan ip6qos aclmap" , "lan ip filter" , "lan ip dscp" , "lan ip6 filter" , "lan
ip6 dscp" and "serverinfo filter" commands.
Default N/A
5.3.4.3 vlan ip6qos aclmap move
Function Change the priority of IPv6 QoS for VLAN
Available Model XG0224 / XG0448
Options
• VLAN ID
Specify the VLAN ID with a decimal value from 1 to 4094
• Priority
Specify the priority with a decimal value
• New Priority
Specify the new priority with a decimal value
Use Mode Configuration mode (admin class)
Explanation Change the priority of IPv6 QoS definition per VLAN
If the current priority is set as , change the priority of this definition to
. When the definition is changed, the priority is renumbered.
Default N/A
Range Model
0 to 511 XG0224 / XG0448