FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 399)

XG Series User's Guide Chapter 5 Command Reference
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Commands
399
10) Number of broadcast frames received per second (Frames/sec.)
11) Number of received PAUSE frames (MAC control frames)
12) Number of discarded frames out of all the received frames
13) Number of received shortsized frames (less than 64 bytes)
14) Number of frames in which FCS error is detected in 64 data size bytes or more
15) Number of received frames in which an alignment error was detected
16) Number of shortsized frames (less than 64 bytes) in which an FCS or alignment
error was detected
17) Number of oversized frames (1519 bytes or more without tag, 1523 bytes or more
with tag) in which an FCS or FCS alignment error was detected
18) Number of detected symbol errors
19) Number of unsupported MAC control frames that were received
20) Total number of sent octets
21) Number of bits sent per second (Bits/sec.)
22) Number of sent frames
23) Number of frames sent per second (Frames/sec.)
24) Number of sent unicast frames
25) Number of sent multicast frames
26) Number of multicast frames sent per second (Frames/sec.)
27) Number of sent broadcast frames
28) Number of broadcast frames sent per second (Frames/sec.)
29) Number of sent pause frames (MAC control frames)
30) Number of frames that were discarded due to an excessive delay
31) Number of frames that entered full state of cue and were abandoned
32) Number of FCS error frame transmissions of 64 data size bytes or more
33) Number of sent frames in which an FCS or FCS alignment error was detected in
the shortsized frames
34) Career undetection error generation frequency
35) Number of frames in which transmission fails by frequent occurrence of collision
36) Number of occurrences of late collisions
37) Number of frames that could be sent after a single collision occurred
38) Number of frames that could be sent after multiple collisions occurred
39) Number of frames that got into a transmission deferment because the
transmissionpath was busy