FUJITSU XG Series P3NK-4452-01ENZD User Manual
Page 139
XG Series User's Guide
Chapter 5 Command Reference
Port Information Settings
139
Note 4.
This command is unavailable if the allowable upper limit for the device is exceeded.
The allowable upper limits are as follows.
• Upper limit based on "commands"
64 commands for the entire device.
Up to 64 commands can be set for the entire device, including the
,
,
commands.
The priority for each command is as follows.
1)
command
A smaller Ethernet port number has a higher priority among Ethernet ports.
2)
command
A smaller VLAN ID has a higher priority among VLANs.
3)
A smaller lan definition number has a higher priority among lans.
4)
A smaller Ethernet port number has a higher priority among Ethernet ports.
5)
A smaller VLAN ID has a higher priority among VLANs.
6)
command
A smaller lan definition number has a higher priority among lans.
• Upper limit based on "masks"
64 masks for the entire device.
Up to 64 masks can be set for the entire device, including the
,
commands.
The priority for each command is as follows.
1)
commands
2)
command
A smaller Ethernet port number has a higher priority among Ethernet ports.A
smaller Ethernet port number has a higher priority among Ethernet ports.
3)
command
A smaller VLAN ID has a higher priority among VLANs.
4)
A smaller lan definition number has a higher priority among lans.
5)
A smaller Ethernet port number has a higher priority among Ethernet ports.
6)
A smaller VLAN ID has a higher priority among VLANs.
7)
command
A smaller lan definition number has a higher priority among lans.
The number of masks that each command use depends on applied ACL.
When Multiple ACL are applied, the number of masks amount to sum total, and
depends on ACLs the number of masks amount to less than sum total.