FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 388)

XG Series User's Guide Chapter 5 Command Reference
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Commands
388
linkaggregation:
Indicates that the port is used as a link aggregation port.
This parameter also indicates the number of the link aggregation
group that the port belongs to.
"*linkaggregation" is displayed when the link aggregation port is
not linked up as a multiplexed link in the linkup state.
backup : Indicates that the port is used as a backup port.
It further indicates the number of the backup group that the port
belongs to.
backup LA : Indicates that the port is used as a backup link aggregation port.
This parameter also indicates the number of the link aggregation
group that the port belongs to.
It further indicates the number of the backup group that the port
belongs to.
"*LA" is displayed when the link aggregation port is not linked up
as a multiplexed link in the linkup state.
4) Media type of the Ethernet port
Indicates that the 10/100/1000BASE-T port or 10/100BASE-TX is used.
-: Indicates that the port is undefined because it is not in the linkup state.
5) MDI state of the Ethernet port
MDI/MDIX:
Indicates the type of the currently linked MDI. (When the media type is metal)
-: Indicates that the port is undefined because it is not in the linkup state.
[Note]
For the server port, even it is in the linkup state the state stays in
"-".
6) Link speed of the Ethernet port
10M/100M/1000M/10G:
Indicates the baud rate (10Mbps, 100Mbps, 1000Mbps or 10Gbps) of the
currently linked Ethernet port.
-: Indicates that the port is undefined because it is not in the linkup state.
7) Duplex state of the Ethernet port
full/half:
Indicates the full duplex or half duplex mode of the currently linked port.
-: Indicates that the port is undefined because it is not in the linkup state, or that
the port is a Fiber port.
8) Flow control state of the Ethernet port
Tx: Indicates that the flow control sending function is enabled.
Rx: Indicates that the flow control receiving function is enabled.
-: Indicates that the port is undefined because it is not in the linkup state, and
that the flow control function is disabled.