6 lan ip6 filter, Lan ip6 filter, Comman – FUJITSU XG Series P3NK-4452-01ENZD User Manual

Page 201: Command, Lan ip6, Filter, Commands, the

XG Series User's Guide

Chapter 5 Command Reference

LAN Information Settings

201

5.5.2.6

lan ip6 filter

Function

Set IPv6 filter

Available Model

XG0224 / XG0448

Syntax

lan [] ip6 filter acl

Options

• lan definition number

Specify lan definition number with a decimal number

• filtering definition number

Set the filtering priority with a decimal value
A smaller value has a higher priority.

• pass

Pass the packets which match

• reject

Discard the packets which match

• ACL definition number

Specify ACL definition number with a decimal value.
- ip

If ip value is not configured, that filter definition is ignored

- tcp

This is enabled when ip6 value is 6

- udp

This is enabled when ip6 value is 17

- icmp

This is enabled when ip6 value is 58

Use Mode

Configuration mode (admin class)

Explanation

Set IPv6 filter for LAN interface

Caution

Note 1.
If none of "acl ip6" definition exist on the access control list which has been specified by
or if the access control list specified by does not exist, the packets are not
filtered.
Note 2.
The packet filtering default value is "pass".
No packets are filtered if only "pass" is set in .

Range

Model

0 to 511

XG0224 / XG0448