FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 199)

XG Series User's Guide Chapter 5 Command Reference
LAN Information Settings 199
5.5.2.3 lan ip6 address
Function Set IPv6 address
Available Model XG0224 / XG0448 / XG2600
Syntax lan [] ip6 address []
Options
• lan definition number
Specify lan definition number with a decimal value
• IPv6 address definition number
Specify IPv6 address definition number with a decimal value from 0 to 3
Specify IPv6 address and prefix length. Link local address can not be specified.
Specify 64 for prefix length.
• auto
Address is automatically set with prefix of received RA (Router Advertisement)
message.
"lan ip6 ra mode recv" need to be set
Use Mode Configuration mode (admin class)
Explanation Set IPv6 address for this interface
Default It is assumed that IPv6 function use only IPv6 link-local addresses.
5.5.2.4 lan ip6 ra mode
Function Set RA (Router Advertisement) message mode
Available Model XG0224 / XG0448 / XG2600
Syntax lan [] ip6 ra mode
Options
• lan definition number
Specify lan definition number with a decimal value
• off
Disable RA message send/receive function
• recv
Enable RA message receive function
Use Mode Configuration mode (admin class)
Explanation Set RA message function mode
• RA message receive function
When it is enabled, ND (Neighbor Discovery) parameter, default route, global address
are configured automatically based on RA message
Default It is assumed that RA message send/receive function is disabled.
lan ip6 ra mode off