FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 233)

XG Series User's Guide Chapter 5 Command Reference
ACL Information Settings 233
5.12 ACL Information Settings
This section explains about ACL information settings.
5.12.1 ACL Information
This section explains about the commands related to ACL information.
Specifying range for ACL definition number
5.12.1.1 acl mac
Function Set the definition of the ACL MAC.
Available Model XG0224 / XG0448 / XG2600
Syntax acl mac llc
acl mac ether
acl mac any
Options
• ACL definition number
Specify an ACL definition serial number with a decimal value.
Specify the source MAC address for ACL.
• any
Specify it when targeting all MAC addresses.
• bcast
Specify it when targeting a broadcast MAC address.
• mcast
Specify it when targeting a multicast MAC address.
• Other than those above
Specify the target MAC address. Specify the source MAC address for ACL in the
xx:xx:xx:xx:xx:xx format, where "xx" is a 2-digit hexadecimal value.
Specify the destination MAC address for ACL.
• any
Specify it when targeting all MAC addresses.
• bcast
Specify it when targeting a broadcast MAC address.
• mcast
Specify it when targeting a multicast MAC address.
Model ACL definition number
XG0224/XG0448 Specify a range between 0 to 799 for ACL definition number (in a decimal number) to specify
"acl_count" written in the [Option] in command in this section.
XG2600 Specify a range between 0 to 299 for ACL definition number (in a decimal number) to specify
"acl_count" written in the [Option] in command in this section.