FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 277)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 277
5.15.1.24 snmp user notify
Function Sets trap notification permission view.
Available Model XG0224 / XG0448 / XG2600
Syntax snmp user [] notify []
Options
• User ID
User ID expressed as a base 10 value from 0 to 7. Default is 0.
Indicates trap notification permission view.
• all
Permission is granted for all supported trap notifications.
• none
Trap notification permission is not granted.
• view
Use the MIB view information set with the
"snmp view subtree" command.
Specifies the
"snmp view subtree" command's MIB view ID number, expressed as a base
10 value from 0 to 7. The view ID can only be set when view is specified for the
option.
Use Mode Configuration mode (admin class)
Explanation Sets trap notification permission view in SNMPv3.
If a
"snmp view subtree" command definition corresponding to the view ID set does not
exist, trap notification permission is not granted.
Default If unset, trap notification permission is granted on all supported trap notifications.
snmp user notify all