FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 469)

XG Series User's Guide Chapter 5 Command Reference
Bridge Counter, Log, Statistics, and Status Display and Clear Operation
Commands
469
10) Maximum wait time (in seconds)
The maximum wait time (in seconds) of configuration BPDUs is displayed.
11) Maximum forwarding delay time (in seconds)
The maximum forwarding delay time (in seconds) is displayed.
12) Remaining hop count from root bridge
The remaining hop count from the root bridge is displayed.
13) Bridge priority
The bridge priority used for the bridge identifier of this device is displayed.
14) MAC address
The MAC address used for the bridge identifier of this device is displayed.
15) Configuration BPDU send interval
The configuration BPDU send interval (in seconds) is displayed.
16) Maximum wait time
The maximum wait time (in seconds) of configuration BPDUs is displayed.
17) Maximum forwarding delay time
The maximum forwarding delay time (in seconds) is displayed.
18) Hop count of maximum forwarding delay
The maximum forwarding delay time is displayed by hop counting.
19) BPDU forwarding function
The BPDU forwarding function (on or off) defined on this device is displayed.
20) STP operation mode
The STP operation mode (disable/stp/rstp/mstp) of this device is displayed.
21) Interface name
The interface name is displayed.
22) Port ID
The Port ID is displayed.
23) Port path cost
The path cost of the port is displayed (the cost value is followed by an asterisk
(*) if calculated automatically).
24) Port status and roles
One of the following is displayed for the port status.
Disabled
: The STP is disabled.
Discarding : The port is in the discarding state (it is displayed only when
RSTP or MSTP is active).
Blocking : The port is in the blocking state.
Listening : The port is in the listening state.
Learning : The port is in the learning state.
Forwarding : The port is in the forwarding state.
One of the following is displayed for the port role.
Disabled : The STP is disabled.
Root : Root port
Designated : Designated port
Blocking
: Blocking port
Alternate : Blocking port
Backup : Backup port