FUJITSU XG Series P3NK-4452-01ENZD User Manual

Page 404

XG Series User's Guide

Chapter 5 Command Reference

Ethernet Counter, Log, Statistics, and Status Display and Clear Operation

Commands

404

11)

Number of received PAUSE frames (MAC control frames)

12)

Number of discarded frames out of all the received frames

13)

Number of received shortsized frames (less than 64 bytes)

14)

Number of frames in which FCS error is detected in 64 data size bytes or more

15)

Number of received frames in which an alignment error was detected

16)

Number of shortsized frames (less than 64 bytes) in which an FCS or alignment
error was detected

17)

Number of oversized frames (1519 bytes or more without tag, 1523 bytes or more
with tag) in which an FCS or FCS alignment error was detected

18)

Number of detected symbol errors

19)

Number of unsupported MAC control frames that were received

20)

Total number of sent octets

21)

Number of bits sent per second (Bits/sec.)

The number of transmission bits of error frames is not counted at the "cut-
through mode".

22)

Number of sent frames

The number of frames in which the transmission discontinuance is done
because the error detection was done in the reception port after it begins to
transmit is contained at the "cut-through" mode.
It doesn't contain the error frame.

23)

Number of frames sent per second (Frames/sec.)

24)

Number of sent unicast frames