FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 310)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 310
5.15.8.18 serverinfo telnet filter move
Function Change the priority of the application filter for the TELNET server function.
Available Model XG0224 / XG0448 / XG2600
Syntax serverinfo telnet filter move
Options
• Target filtering definition number
Specify a filtering definition number of which the priority is to be changed.
• Destination filtering definition number
Specify a new priority for with a decimal value from 0 to 29.
If any definition with the same definition number exists, it will be inserted before the
existing one.
Use Mode Configuration mode (admin class)
Explanation Change the priority of the application filter for the TELNET server function.
5.15.8.19 serverinfo telnet filter default
Function Set the default operation of the application filter for the TELNET server function.
Available Model XG0224 / XG0448 / XG2600
Syntax serverinfo telnet filter default
Options
Specify how to handle a packet that did not match any application filter table for the
TELNET server function.
• accept
Transmit the relevant packet.
• reject
Block the relevant packet.
Use Mode Configuration mode (admin class)
Explanation Set how to handle a packet that did not match any application filter table for the TELNET
server function.
Default A packet that did not match any application filter table is transmitted.
serverinfo telnet filter default accept