beautypg.com

9 syslog source address – FUJITSU XG Series P3NK-4452-01ENZD User Manual

Page 285

background image

XG Series User's Guide

Chapter 5 Command Reference

Device Information Settings

285

5.15.2.9 syslog source address

Function

Set the source IP address of the system log information.

Available Model

XG0224 / XG0448 / XG2600

Syntax

syslog source address

Options


Specify the source IPv4 address that is used for sending the system log information.
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254

Use Mode

Configuration mode (admin class)

Explanation

Specify the source IPv4 address that is used for sending the system log information.
If the IPv4 address is not set, the IPv4 address of the sending interface is used.

Default

It is assumed that use the IPv4 address of the sending interface in used.

See also other documents in the category FUJITSU Hardware: