FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 271)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 271
5.15.1.18 snmp user address
Function Set a SNMP host address.
Available Model XG0224 / XG0448 / XG2600
Syntax snmp user [] address []
Options
• User definition number
Specify a user definition number with a decimal value from 0 to 7.
The default is 0.
• SNMP host definition number
Specify a SNMP host definition number with a decimal value from 0 to 7.
The default is 0.
Specify an IP address of the host, which permits SNMPv3 access, in the
XXX.XXX.XXX.XXX format, where "XXX" indicates a 3-digit decimal value.
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
Use Mode Configuration mode (admin class)
Explanation Set a SNMP host address under SNMPv3. Up to eight addresses can be defined for this
device, including ones set in the
"snmp user notification" command.
Default It is assumed that no SNMP host address is set.