FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 418)

XG Series User's Guide Chapter 5 Command Reference
USB connection Counter, Log, Statistics, and Status Display and Clear
Operation Commands
418
10) Request sense code
When an error is detected by the USB device the error data established on the
USB device is displayed.
11) Vendor
Vendor information for the USB device is displayed.
12) Product
Product information for the USB device is displayed.
13) Product Rev.
Product revision information for the USB device is displayed.
14) Total sectors
The total number of sectors held on the USB device is displayed.
15) Cylinders
The number of cylinders on the USB device is displayed.
16) Heads
The number of heads on the USB device is displayed.
17) Sectors per track
The number of sectors per track (per head, per cylinder) on the USB device is
displayed.
18) Speed
The USB protocol speed is displayed. Same as (3) above.
19) Max LUN
The maximum LUN value for the USB device. This switch does not support
devices that do not have LUN=0.
20) Device address
The device number allocated by USBD in order to uniquely identify devices on
the USB bus is displayed.
21) Interface
The interface number selected by the USB mass storage controller thread is
displayed.
22) Sub class
The subclass for the USB device is displayed. Class information is 0(=mass
storage class).
23) LUN
The LUN number selected by the USB mass storage controller thread is
displayed.
24) BulkInEP
The bulk-in endpoint number selected by the USB mass storage controller
thread is displayed.
25) BulkOutEP
The bulk-out endpoint number selected by the USB mass storage controller
thread is displayed.