FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 300)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 300
5.15.8 Other
This section explains about other commands.
5.15.8.1 addact
Function Set the command execution reservation.
Available Model XG0224 / XG0448 / XG2600
Syntax addact
Options
• Registration number
Specify the registration number of the command execution reservation information.
Make sure to specify "0".
• Execution date and time
Specify a command execution date and time in the yymmddHHMM format.
yy
: Specify the last two digits of the year, up to 2036.
mm : Specify month with a decimal value from 1 to 12.
dd : Specify date with a decimal value from 1 to 31.
HH : Specify hour with a decimal value from 0 to 23.
MM : Specify minutes with a decimal value from 0 to 59.
Specify a command character string to be executed.
• reset
Specify it when rebooting the device.
• reset config1
Specify it when switching to the configuration 1 at device restart.
• reset config2
Specify it when switching to the configuration 2 at device restart.
Use Mode Configuration mode (admin class)
Explanation Set the command execution reservation.
Caution The following shows the cautions when executing a command using the schedule
function.
• Set the device time correctly.
• Make sure that the device has been turned on before the command is executed.
Execution Example
The following shows a setting example to restart the device at 02:00 a.m. in January 1,
1999 switching to configuration 2.
Default It is assumed that no reservation is set to execute a command.
# addact 0 9901010200 reset config2
# show addact
0 9901010200 reset config2
#