FUJITSU XG Series P3NK-4452-01ENZD User Manual
Page 130
XG Series User's Guide
Chapter 5 Command Reference
Port Information Settings
130
• LLDP Information Name
Specify LLDP Information Name (TLV of 802.1AB)
port-description
: Port Description Information (Port Description TLV)
system-name
: System Name Information (System Name TLV)
system-description
: Sysrem description Information (System Description TLV)
system-capabilities
: System Capabilities Information (System Capabilities TLV)
management-address
: Management Address Information
(Management Address TLV)
port-vlan-id
: Port VLAN ID Information (IEEE802.1 Port VLAN ID TLV)
port-and-protocol-vlan-id : Prootocol VLAN ID Information
(IEEE802.1 Port And Protocol VLAN ID TLV)
vlan-name
: VLAN Name Information (IEEE802.1 VLAN Name TLV)
protocol-identity
: Protocol VLAN Identitiy Information
(IEEE802.1 Protocol Identity TLV)
mac-phy-configuration-status
: MAC/PHY Configuration /Status Infomation
(IEEE802.3 MAC/PHY Configuration/Status TLV)
power-via-mdi
: MDI Power Information (IEEE802.3 Power Via MDI TLV)
link-aggregation
: Link Aggregation Information
(IEEE802.3 Link Aggregation TLV)
maximum-frame-size
: Maximum Frame Size Information
(IEEE802.3 Maximum Frame Size TLV)
• Send mode
Set whether LLDP information is sent or not
enable: send LLDP information
disable: not send LLDP information
Use Mode
Configuration mode (admin class)
Explanation
Set whether LLDP information is sent or not
Default
It is assumed that Send mode of all LLDP Information is "enable".
ether
ether
ether
ether
ether
ether
ether
ether
ether
ether
ether
ether
ether