FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 389)

XG Series User's Guide Chapter 5 Command Reference
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Commands
389
5.20.1.3 show ether statistics
Function Display the statistics of Ethernet physical ports.
Available Model XG0224 / XG0448 / XG2600
Syntax show ether statistics [line ] [detail]
Options
N/A
Display all the statistics.
line
• Display the statistics of the specified port.
No statistics are displayed if the specified port number is invalid.
The management port is specified by "m1".
The port for an internal connection that ties each switch device is specified by "C1".
When specifying multiple port numbers, separate them with commas (,).
The specification of the port simultaneously other than m1 and m1 are also possible.
The specification of the port simultaneously other than c1 to c4 and c1 to c4 are also
possible.
When specifying sequential numbers, separate them with hyphens (-). (Example: "1-8")
detail
Display the statistics of the Ethernet ports together with related detailed information.
Even if detail is specified, the content of the display is not added for the m1 port.
Use Mode Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation Display the statistics of the Ethernet physical port.
Specifying only the "line" option will display the statistics of the target port.
The relation between the port number and the switch device of XG0448 is shown.
Connected port between switch devices is called an "internal connection port".
The relation between the internal connected port number and the switch device is shown.
C1 is connected with C3. C2 is connected with c4.
Caution The statistics are cleared if this device is restarted.
Range Model
1 to 26 XG0224
1 to 52, c1 to c4 XG0448
1 to 26,m1 XG02600
Range switch device
1 to 24,51,52 switch device 0
25 to 50 switch device 1
Range switch device
c1,c2 switch device 0
c3,c4 switch device 1