FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 412)

XG Series User's Guide Chapter 5 Command Reference
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Commands
412
5.20.1.6 show ether queue
Function Display the number of packets placed in the COS queue of Ethernet physical ports.
Available Model XG0224 / XG0448 / XG2600
Syntax show ether queue [line ]
Options
N/A
Display the number of packets placed in the COS queue of all ports.
line
Display the number of packets placed in the COS queue of the specified port.
No information is displayed if the specified port number is invalid.
When specifying multiple port numbers, separate them with commas (,).
When specifying sequential numbers, separate them with hyphens (-). (Example: "1-8")
Use Mode Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation Display the number of packets remaining in the COS queue of Ethernet physical ports.
If the "line" option is specified, the information of the target port is displayed.
Caution The number of packets remaining in the COS queue is cleared if this device is restarted.
Range Model
1 to 26 XG0224
1 to 52, c1 to c4 XG0448
1 to 26 XG2600