FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 82)

XG Series User's Guide Chapter 4 Switch Functions and their Configuration
IGMP Snooping 82
4.8.5 Configuring IGMP Snooping
To configure IGMP snooping, carry out the following procedure in "admin" Operation mode.
To enable IGMP query, carry out the following procedure in "admin" Operation mode.
Command Task
XG2600# configure Switch to Configuration mode.
XG2600(config)# igmpsnoop use on Enable global IGMP snooping on the device.
XG2600(config)# vlan 10 igmpsnoop router yes 15,16 Specify the multicast router port statically with VLAN.
XG2600(config)# commit Apply the configuration.
XG2600(config)# save Save the configuration.
XG2600(config)# exit Switch to Operation mode.
Command Task
XG2600# configure Switch to Configuration mode.
XG2600(config)# igmpsnoop use on Enable global IGMP snooping on the device.
XG2600(config)# vlan 20 igmpsnoop querier on Specify the Querier operation mode if no multicast router exists.
XG2600(config)# commit Apply the configuration.
XG2600(config)# save Save the configuration.
XG2600(config)# exit Switch to Operation mode.