FUJITSU XG Series P3NK-4452-01ENZD User Manual
Page 165

XG Series User's Guide
Chapter 5 Command Reference
VLAN Information Settings
165
Caution
Note 1.
If none of "acl mac", "acl vlan" and "acl ip" definitions exist on the access control list
which has been specified by
exist, the packets are not filtered.
Note 2.
The packet filtering default value is "pass".
No packets are filtered if only "pass" is set in
[XG2600]
Note 3.
"acl mac llc" definitions can not filter llc frames with the VLAN tag.
Note 4.
This command is unavailable if the allowable upper limit for the device is exceeded.
The allowable upper limits are as follows.
• Upper limit based on "commands"
64 commands for the entire device.
Up to 64 commands can be set for the entire device, including the
,
commands.
The priority for each command is as follows.
1)
command
A smaller Ethernet port number has a higher priority among Ethernet ports.
2)
command
A smaller VLAN ID has a higher priority among VLANs.
3)
A smaller lan definition number has a higher priority among lans.
4)
A smaller Ethernet port number has a higher priority among Ethernet ports.
5)
A smaller VLAN ID has a higher priority among VLANs.
6)
command
A smaller lan definition number has a higher priority among lans.
• Upper limit based on "masks"
64 masks for the entire device.
Up to 64 masks can be set for the entire device, including the
,
commands.
The priority for each command is as follows.
1)
commands
2)
command
A smaller Ethernet port number has a higher priority among Ethernet ports.
3)
command
A smaller VLAN ID has a higher priority among VLANs.
4)
A smaller lan definition number has a higher priority among lans.