FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 273)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 273
5.15.1.20 snmp user auth
Function Set the authentication protocol
Available Model XG0224 / XG0448 / XG2600
Syntax snmp user [] auth [ [encrypted]]
Options
• User definition number
Specify the user definition number with a decimal value from 0 to 7.
The default is 0
Specify the authentication protocol
• none
Specify it when unusing authentication protocol.
• md5
Specify it when using MD5(HMAC-MD5-96)
• sha
Specify it when using SHA (HMAC-SHA-96)
Set the authentication password
• In the case of specifying unencryption password
• In the case of specifying encryption password
Specify the encrypted authentication password shown by show command with
"encrypted"
Specify the characters which is shown by show command
encrypted
• Specify encrypted authentication password
Specify it when specifying encrypted authentication password in
Use Mode Configuration mode (admin class)
Explanation Set authentication protocol for SNMPv3
Default It is assumed that the authentication protocol is not use.
Authentication Protocol Password length
md5
sha1 8-16 characters
8-20 characters
snmp user auth none