FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 316)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 316
5.15.8.27 serverinfo http filter
Function Set the application filter for HTTP server function
Available Model XG0224 / XG0448 / XG2600
Syntax serverinfo http filter acl
Options
• Filtering definition number
Specify a definition number, which indicates a filtering priority, with a decimal value
from 0 to 29.
A smaller value has a higher priority
Specify the action when the packets match the filter.
• accept
Accept the packets
• reject
Reject the packets
• ACL definition number
Set the required ACL definition number with a decimal value.
If the ACL specified in is not set, the filtering definition will be disabled and
ignored.
The following ACL definition is available for application filtering.
- ip
Source IP address and the number of mask bits are used for the filter.
If IP value has not been set, the filtering definition will be disabled and ignored.
- ip6
Source IPv6 address and the prefix length are used for the filter.
If IPv6 value has not been set, the filtering definition will be disabled and ignored.
Use Mode Configuration mode (admin class)
Explanation Set the application filter for HTTP server function
Default N/A