FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 314)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 314
5.15.8.23 serverinfo ssh filter move
Function Change the priority of the application filter for the SSH server function.
Available Model XG0224 / XG0448 / XG2600
Syntax serverinfo ssh filter move
Options
• Target filtering definition number
Specify a filtering definition number of which the priority is to be changed.
• Destination filtering definition number
Specify a new priority for with a decimal value from 0 to 29.
If any definition with the same definition number exists, it will be inserted before the
existing one.
Use Mode Configuration mode (admin class)
Explanation Set the priority of the application filter for the SSH server function.
5.15.8.24 serverinfo ssh filter default
Function Set the default operation of the application filter for the SSH server function.
Available Model XG0224 / XG0448 / XG2600
Syntax serverinfo ssh filter default
Options
Specify how to handle a packet that did not match any application filter table for the SSH
server function.
• accept
Transmit the relevant packet.
• reject
Block the relevant packet.
Use Mode Configuration mode (admin class)
Explanation Set how to handle a packet that did not match any application filter table for the SSH
server function.
Default A packet that did not match any application filter table is transmitted.
serverinfo ssh filter default accept