FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 373)

XG Series User's Guide Chapter 5 Command Reference
Configuration Display, Delete and Operation Commands 373
5.19.3 Configuration Operation Commands
This section explains about commands related to configuration definition information operations.
5.19.3.1 load
Function Read (or load) the configuration.
Available Model XG0224 / XG0448 / XG2600
Syntax load
Options
Specify the name of the file to be read (or loaded).
Use Mode Configuration mode (admin class)
Explanation Read the specified configuration.
All the data being set will be invalid.
The following file names can be specified.
running-config : Running configuration file
startup-config : Startup configuration file
config1
: Configuration 1 file
config2 : Configuration 2 file
Message
Since the device has a high communication load, it failed in reading the configuration.
Stop the communication load, and execute the command again.
The administrator password is not set.
Set an administrator password.
The administrator password is seven or fewer characters in length.
Set an administrator password with eight or more characters.
The administrator password consists of only alphabetic characters or only numeric
characters.
Set an administrator password with alphanumeric characters and symbols mixed.
The user password is seven or fewer characters in length.
Set a user password with eight or more characters.
The user password consists of only alphabetic characters or only numeric characters.
Set a user password with alphanumeric characters and symbols mixed.
load failed: config read error
weak admin password: set the password
weak admin password: contain at least 8 characters
weak admin password: contain a different kind of character
weak user password: contain at least 8 characters
weak user password: contain a different kind of character