FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 536)

XG Series User's Guide Chapter 5 Command Reference
I’m here Commands 536
5.46 I’m here Commands
This section explains about "I’m here" commands.
5.46.1 I’m here Commands
5.46.1.1 iamhere
Function Blink the READY LED and the CHECK LED alternately.
Available Model XG0224 / XG0448 / XG2600
Syntax iamhere []
Options
• on
Blink the READY LED and the CHECK LED alternately.
- []
Specify the LED blinking time (1s-86400s,1m-1440m,1h-24h,1d).
The unit shall be d (day), h (hour), m (minute), or s (second).
• off
Stop blinking.
Use Mode Operation mode (admin class)
Configuration mode (admin class)
Explanation Blink the READY LED and the CHECK LED alternately. This allows visually locating a
switch quickly within a rack or series of racks.
During blinking, the following LEDs are turned off:
XG2600
STATUS LED, ERROR LED, FLASH LED, FAN LED.
XG0224/XG0448
ERROR LED, FLASH LED
Execution Example
# iamhere 0n 30m