FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 211)

XG Series User's Guide Chapter 5 Command Reference
LAN Information Settings 211
5.5.6 Management LAN port IPv6 Related Information
This section explains about the commands related to Management LAN port IPv6 Related Information.
5.5.6.1 oob ip6 use
Function Set IPv6 function of oob port
Available Model XG2600
Syntax oob ip6 use
Options
Specify wheter or not to receive and send IPv6 packets
• on
Enable IPc6 function
• off
Disable IPv6 function
Use Mode Configuration mode (admin class)
Explanation Specify wheter or not to receive and send IPv6 packets
Default It is assumed that the IPv6 server function is not used.
5.5.6.2 oob ip6 ifid
Function Set IPv6 interface ID
Available Model XG2600
Syntax oob ip6 ifid
Options
Specify ID for this interafce
• auto
Automatically generated ID (EUI-64 format) from MAC address is used
• Interface ID
Specify ID for this interface with a hexadecimal value. Separate 4 degits with " "(colon)
Normally specify "auto".
Use Mode Configuration mode (admin class)
Explanation Set IPv6 interface ID
Default It is assumed that "auto" has been set.
oob ip6 use off
oob ip6 ifid auto