FUJITSU XG Series P3NK-4452-01ENZD User Manual

Page 538

XG Series User's Guide

Chapter 5 Command Reference

Other Commands

538

tos
• TOS value

Specifies the TOS value as a hexadecimal value in the range of 0x00 to 0xff. Default is
0x00.
Only valid for IPv4.

ttl
• TTL value

Specifies the TTL value as a decimal value in the range of 0 to 255. Default is 128 for
IPv4, 64 for IPv6.

timeout
• Time to wait for response

Specifies the time to wait for a response (in seconds) as a base 10 value in the range of
1 to 300.
Default is 20 seconds.

df
• Don’t fragment

Sets the Don’t Fragment bit on the packets to be sent so they won’t be fragmented en
route.
Only valid for IPv4.

Use Mode

Operation mode (user class/admin class)
Configuration mode (admin class)

Explanation

Sends an ICMP ECHO_REQUEST to the specified host (IP address or host name), and
confirms receipt of an ICMP ECHO_RESPONSE.

Execution Example

(a) Without options (only the IP address is specified)

(b) Host name specified

(b) Repeat (3 times specified)

*When specifying options, do so in the order in which they appear in the syntax.

# ping 192.168.1.1

192.168.1.1 is alive.

# ping jp.fujitsu.com

192.168.1.2 is alive.

# ping jp.fujitsu.com v6

fe80:::fffe:c100:e00:5555:80c2 is alive.

# ping 192.168.1.1 repeat 3

PING 192.168.1.1: 56 data bytes.

64 bytes from 192.168.1.1: icmp_seq=0 ttl=255 time=0.768 ms

64 bytes from 192.168.1.1: icmp_seq=1 ttl=255 time=0.736 ms

64 bytes from 192.168.1.1: icmp_seq=2 ttl=255 time=0.736 ms

----192.168.1.1 PING Statistics----

3 packets transmitted, 3 packets received, 0% packet loss

round-trip (ms) min/ave/max = 0.736/0.746/0.768