FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 375)

XG Series User's Guide Chapter 5 Command Reference
Configuration Display, Delete and Operation Commands 375
5.19.3.3 commit
Function Commit (or dynamically activate) the configuration.
Available Model XG0224 / XG0448 / XG2600
Syntax commit
Options N/A
Use Mode Configuration mode (admin class)
Explanation Apply the configuration that was set or changed with the configuration command, without
device restart.
Caution Changing the configuration may cause the communication interface to come down once
in order to apply address information in the device, resulting in a communication
interrupt.
Message
Since unallowable configuration was added or changed, it cannot be applied.
Execute the
"reset" command after the "save" command, and restart the device.
No configuration is added or changed.
It is not necessary to execute the commit command.
Execution Example
Reference "5.48 Effect by "commit" Command Execution" (pg.543)
Need to do reset after execute the save command.
The candidate-config is not changed.
# commit
#