FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 545)

XG Series User's Guide Chapter 5 Command Reference
Effect by "commit" Command Execution 545
(0)
The settings are enabled immediately after the command has been executed.
(1)
Only the relevant function is stopped or restarted.
(1)-1
In addition to operation (1), the relevant route is added or deleted with the route
change for this device and the neighboring routers.
(2)
The communication via the relevant logical interface is interrupted briefly.
(3)
The relevant Ethernet port is linked down or linked up.
(3)-LA
If changed from "static" to "passive" or "active" or vice versa, the relevant Ethernet
port is linked down or linked up.
If changed from "passive" to "active" or vice versa, the operation is the same as (1).
(3)-1
If changed from "online" to "offline", the relevant Ethernet port is linked down or
linked up.
If changed from "offline" to "online", the operation is the same as (1).
(4)
To enable the settings, the device needs to be restarted (or reset).
ACL acl (6)*6:XG2600
(1):XG0224/XG0448
AAA aaa (1)
Device snmp (1)
syslog (1)
time (1)
proxydns (1)
host (1)
password format (0)
password admin set (0)
password user set (0)
password aaa (1)
password authtype (1)
schedule (1)
resource (4):XG0224/XG0448
watchdog service (4)
consoleinfo (1)
telnetinfo (1)
mflag (1)
dumpswitch (1):XG0224/XG0448
sysname (4)
serverinfo (1)
Login banner login banner telnet (1)
login banner ftp (1)
login banner ssh (1)
login banner description (1)
Type Command Name Effect of "commit"