FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 32)

XG Series User's Guide Chapter 1 Features and Functions
Software Specifications 32
*1) For the packets which applied MAC/IP filter, QoS function with the use of ACL become void.
1.2.2 Initial Values
–: Not supported
Logging
System logging ❍ ❍ ❍
Error logging ❍ ❍ ❍
Automated time adjustment ❍ ❍ ❍
Scheduling ❍ ❍ ❍
Compact flash ❍ – –
USB memory – ❍ ❍
Item
Features
XG0224 XG0448 XG2600
Port information
ETHER port
1-20 21-24 25-26 1-44 45-48 49-52 1-26
Manage
ment port
Copper/Fiber
–
Auto-
detect
– –
Auto-
detect
–
10Gbps
(Fixed)
10/
100Mbps
(Auto-
detect)
Full/half duplex
Auto-detect – Auto-detect –
Full-
duplex
(Fixed)
Auto-
detect
MDI/MDI-X
Auto-detect – Auto-detect – –
MDI
(Fixed)
Flow control
tx: OFF, rx: ON
tx: OFF
(Fixed)
rx: ON
(Fixed)
VLAN VID 1 (no tag) –
Protocol VLAN
Predefined protocol IPv4, IPv6, FNA
Link aggregation
Load balancing algorithm tx MAC address XOR rx MAC address
Back up port
Port selection scheme Master ports preferred
STP information
STP operating mode STP used Disabled
LLDP Disabled Used
LLMNR Enabled (lan 0,vlan1) Disabled Enabled
Loop detection Disabled
Broadcast/Multicast storm control Disabled
Egress Rate Control – Disabled
IGMP snoop Disabled
Item
Features
XG0224 XG0448 XG2600