FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 414)

XG Series User's Guide Chapter 5 Command Reference
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Commands
414
5.20.2 Ethernet Counter, Log, and Statistics Clear Commands
This section explains the commands related to Ethernet counter, log, statistics,
and statistics clear commands.
5.20.2.1 clear ether statistics
Function Clear the statistics of Ethernet physical ports.
Available Model XG0224 / XG0448 / XG2600
Syntax clear ether statistics [line ]
Options
N/A
Clear all the statistics.
line
Clear the statistics of the specified port.
No statistics are not cleared if the specified port number is invalid.
The management port is specified by "m1".
When specifying multiple port numbers, separate them with commas (,).
The specification of the port simultaneously other than m1 and m1 are also possible.
The specification of the port simultaneously other than c1-4 and c1-4 are also possible.
When specifying sequential numbers, separate them with hyphens (-). (Example: "1-8")
Use Mode Operation mode (admin class)
Configuration mode (admin class)
Explanation Clear the statistics of the Ethernet physical port.
Specifying only the "line" option will clear the statistics of the target port.
Caution
XG0224 / XG0448
It might be considered that it restores it from the state of the roughhouse once when
broadcast/multicast roughhouse control information is set, and the statistical information
of "clear ether statistics" pertinent port is cleared with the reception rate exceeds the
threshold.
Execution Example
Range Model
1 to 26 XG0224
1 to 52, c1 to c4 XG0448
1 to 26, m1 XG02600
# clear ether statistics
#