FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 303)

XG Series User's Guide Chapter 5 Command Reference
Device Information Settings 303
5.15.8.6 dumpswitch
Function Allows/disallows dumping of data to external media.
Available Model XG0224 / XG0448
Syntax dumpswitch
Options
• enable
Allows dumping of data to external media via a dump switch.
• disable
Disallows dumping of data to external media via a dump switch.
Use Mode Configuration mode (admin class)
Explanation Allows/disallows dumping of data to external media via a dump switch.
Default If unset, dumping of data to external media via a dump switch will be allowed.
5.15.8.7 sysname
Function Set a name of this device.
Available Model XG0224 / XG0448 / XG2600
Syntax sysname
Options
• Name
Specify a name of this device using up to 32 characters from 0x21, 0x23 to 0x7e ASCII
set.
Use Mode Configuration mode (admin class)
Explanation Set a name of this device.
The name set in this command can be used as the MIB variable, sysName, which is used
for SNMP. In this case, by deleting the sysName value set in the
"snmp agent sysname"
command, the host name set in this command can be used as sysName.
This command is not directly associated with the
"snmp agent sysname" command
regarding the behavior on the network. However, their names should be identical for
network control purposes.
Caution When you use LLMNR function, please start "sysname" at alphabetic characters, and
use only alphameric characters, "-" and "_". Some LLMNR client can't use some symbols
and string start at numeric characters.
Default It is assumed that a name of this device is not set.
dumpswitch enable