FUJITSU XG Series P3NK-4452-01ENZD - Manual (Page 527)

XG Series User's Guide Chapter 5 Command Reference
Socket Status Display Commands 527
(Continued)
1) Protocol
tcp or udp is displayed.
2) Amount of queued data awaiting readout
The amount of data awaiting readout by the application layer software is
displayed among the data received by the device.
3) Amount of data transmission awaiting acknowledgment
The amount of data, whose transmission has not been acknowledged yet, is
displayed among the data sent from application layer software.
4) Local address and port number
The local address and its port number are displayed. If omitted, an asterisk (*) is
displayed instead.
udp 0 0 *.68 *.*
udp 0 0 *.68 *.*
udp 0 0 *.68 *.*
udp 0 0 *.68 *.*
udp 0 0 *.68 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 127.0.0.1.2645 *.*
udp 0 0 *.67 *.*
udp 0 0 *.53 *.*
udp 0 0 *.67 *.*
udp 0 0 127.0.0.1.52000 *.*
udp 0 0 *.67 *.*
udp 0 0 *.67 *.*
udp 0 0 127.0.0.1.2642 *.*
udp 0 0 *.37 *.*
udp 0 0 *.67 *.*
udp 0 0 127.0.0.1.2639 *.*
udp 0 0 127.0.0.1.2638 *.*
udp 0 0 127.0.0.1.161 *.*
udp 0 0 127.0.0.1.8900 *.*
udp 0 0 127.0.0.1.2631 *.*
udp 0 0 *.123 *.*
udp 0 0 *.67 *.*
udp 0 0 127.0.0.1.2633 *.*
udp 0 0 127.0.0.1.2632 *.*
udp 0 0 127.0.0.1.2634 *.*
udp 0 0 127.0.0.1.2635 *.*
udp 0 0 127.0.0.1.2637 *.*
udp 0 0 *.500 *.*
udp 0 0 127.0.0.1.2628 *.*
udp 0 0 127.0.0.1.2629 *.*
udp 0 0 127.0.0.1.2621 *.*
udp 0 0 127.0.0.1.2623 *.*
udp 0 0 127.0.0.1.2627 *.*
udp 0 0 127.0.0.1.2624 *.*
udp 0 0 127.0.0.1.2625 *.*
udp 0 0 127.0.0.1.2622 *.*
#